Wiring Planner

2.0.0-rc.1 Pick the channel every device sits in, then wire from the run list.

The panel

Click a device to pick it up, then click a channel.
Not placed yet
+12 V from a breaker regulated / fused low-current CAN Ethernet / signal

Wire runs

every run, both ends
#FromToFunction Brk ATyp ALen ft V-dropWire

CAN chains

daisy-chain order, in order

Pre-flight checklist

auto-validated

Harness

every run, from its terminal
+12 V from a breaker regulated / fused CAN, daisy-chained signal stroke width tracks gauge

Recommendations

Bill of materials

estimated
QtyItemNotes